Steps for the Direct TV RC65 Universal Remote Control
Direct TV remote Vizio TV codes: 10056 ,10864, 10885, 11499, 11756, 11758,10178, 10019
1. Turn on the TV.
2. Locate the 5-digit code for your TV.
3. Slide the MODEswitch to the TV position.
4. Press and hold the MUTE and SELECT keys at the same time until the green light under the TV position flashes twice, then release both keys.
5. Using the number keys enter the 5-digit code for your brand of TV. If performed correctly, the green light under TV flashed twice.
6. Aim the remote at your TV and press the PWR key once. Your TV should turn off. If it does not turn off, repeat steps 3 and 4, trying each code for your brand until you find the correct code.
7. Slide the MODE switch to the DIRECTV position. Press TV POWER . Your TV should turn on.
8. For future reference, write downthe working code for your TV
------
Once you have setup the DIRECTV Remote control for your TV, you can activate the TV INPUT
key so you can change the “source”
1. Slide the MODE switch to the TV position.
2. Press and hold the MUTE and SELECT keys until the green light under the TV position flashes twice, then release both keys.
3. Using the number keys enter 9-6-0. (The green light under the TV position flashes twice.)
You now can change the input for your TV.
Deactivating the TV Input Select Key If you want to deactivate the TV INPUT key, repeat steps 1 through 3 from the previous section; the green light will blink 4 times. Pressing the TV INPUT key will now do nothing